Monday, February 20, 2012

Responsible Organic Solvents: Exploring Government Classifications

Responsible Organic Solvents: Exploring Government Classifications
By Timothy Byron

image: depositphotos
Businesses invest quite a bit of cash into their machinery and mechanical parts, and consequently take upkeep procedures very seriously. While accumulation of dirt and dust is perfectly normal, the truth is that if these materials are not properly washed off machinery, they will cause long-term problems like corrosion.

More seriously, when these materials are not washed off of critical parts like ball joints, these components become dangerous to use and can lead to human fatality. For this reason, many organizations choose to use solvents to clean their machinery and parts. These substances use a solid, liquid, or gas to dissolve another solid, liquid, or gas. In the process, these materials end up being uniformly distributed so that no residue remains. Environmentally responsible organizations will go a step further and use organic solvents because their natural ingredients do not pose a threat to users or the environment. Yet when a company is concerned with more than just grime and needs to remove grease or oil, a degreaser/ MIL-PRF-680 will not only get the job done, but also allow the company to breathe easier knowing that their product is environmentally preferred.

Companies will find that there are actually four different classifications of MIL-PRF-680 degreasers. They are classified based on the four different types of petroleum distillates, and the degreaser's flash point. A flash point is simply the lowest temperature at which a material will vaporize. Additional information on each level of classification can be found below.

Type 1
This designation is also commonly known as a Stoddard Solvent, and refers to those degreasers containing a low flash point.

Type 2
This distinction refers to those degreasers with a high flash point, more specifically 141 degrees Fahrenheit.

Type 3
This classification fits those cleaners with a very high flash point, more specifically 200 degrees Fahrenheit.

Type 4
This distinction is given to those degreasers that have a high flash point (141 degrees Fahrenheit) with citrus odor, and are referred to as a d-limonene blended solvent.

Now that the classifications have been explained, it is worth noting what makes MIL-PRF-680 degreasers so beneficial in the first place. These cleaners are made without hazardous ingredients like chlorine, so that they are safer for use by employees. This also means these products are environmentally preferred, which is a great benefit for responsible organizations concerned about the environmental influence of their working processes. They are powerful enough to remove grease, oil, and carbon residue, but are still safe on rubber or plastic surfaces. These products will also evaporate fully, without leaving any residue, and are odorless.

The utilization of MIL-PRF-680 degreasers is just one way that environmentally responsible organizations can reduce their carbon footprint. Companies might also consider recycling their organic solvents, so that there is less packaging and hazardous waste to dispose. It will also be a good idea to avoid using chemicals that contain Volatile Organic Compounds (VOCs) as these can be detrimental to the atmosphere. For additional tips on reducing your company's environmental impact, consult a distributor of organic solvents.

Organizations looking to reduce their environmental impact should use organic solvents like degreasers/MIL-PRF-680 and contact a distributor of these items for additional tips.

Article Source:

No comments:

Post a Comment

Banner Exchange